Tilemaster offer a complete range of preparation products that will enable you to ensure all suitable & correctly installed substrates are ready for the next stage of the installation and provide a perfect base for a successful and long lasting installation.
Tilemaster FAST One Coat DPM is a two component, solvent free, one coat epoxy Damp Proof Membrane. Tilemaster FAST One Coat DPM is suitable for use in a one coat application on a wide range of substrates including concrete, sand & cement screeds and calcium sulphate screeds.
Tilemaster FAST One Coat DPM is ideal for use as a damp proof membrane where the residual moisture content in a new or existing cementitious screed is up to 98% Relative Humidity (RH). Tilemaster FAST One Coat DPM can also be used in a one coat application to deal with damp substrates where a structural damp proof membrane is not present or where the structural damp proof membrane is ineffective. Once cured,
Tilemaster FAST One Coat DPM produces a membrane which can accommodate hygrometer readings up to 98% RH on cement based screeds, up to 90% RH on heated calcium sulphate screeds and up to 95% RH on unheated calcium sulphate screeds, without resulting in bond strength issues. Tilemaster FAST One Coat DPM has effective resistance to water, grease, oil, dilute mineral and organic acids.
PLEASE NOTE: When applying Tilemaster FAST One Coat DPM to a substrate where a structural damp proof membrane is not present or is ineffective, the product must be applied to a minimum thickness of 350 microns which can be achieved by using the B2 trowel supplied.
Coverage
When applied to a smooth surface using an A2 trowel: A 3kg unit will cover up to approximately 7.5m2 A 7kg unit will cover up to approximately 17.5m2 A 14kg unit will cover up to approximately 35m2 When applied to a smooth surface using a B2 trowel: A 3kg
Pack Sizes
3kg, 7kg, 14kg
Colour
Dark Metallic
To calculate the number of bags required, please complete the following: