Uncoupling / Decoupling Mat

Tilemaster Uncoupling / Decoupling Mat is an anti-fracture / uncoupling matting designed for use on floor tile installations where there is a need to absorb and accommodate limited lateral movement.

Anti-Fracture Mat

Anti-Fracture / Uncoupling Matting for Floors Subject to Lateral Movement

Tilemaster Anti-Fracture Mat is an uncoupling / decoupling mat designed for use on floor tile installations to prevent substrate lateral movement from cracking the tiled finish. Tilemaster Anti-Fracture Mat can be used in a wide range of applications to absorb lateral movement from substrates and to bridge stress / shrinkage cracking in substrates to prevent such movement being transferred to the tiled finish. The matting can be used when installing a large variety of tiles including ceramic, porcelain and natural stone tiles. Tilemaster Anti-Fracture Mat is ideal for domestic and commercial applications in light, medium and heavy duty environments. 

Anti-Fracture Mat

Pack Sizes

Grey, White

  • Three Layer Uncoupling / Decoupling Mat Designed To Accommodate & Absorb Lateral Movement In Sub-floors To Prevent Cracking The Tiled Finish
  • Ideal For Underfloor Heating Systems
  • Can Be Tiled Over Immediately After Fitting The Mat
  • Less Than 1mm Thick – Minimises Height Build Up
  • Cuts Costs And Uses Less Adhesive Than Cavity Mats – Approximately 30kg Less Per 20 Metre Roll
  • Simply Butt-joint, No Need To Overlap Or Use Jointing Tape
Surface / Substrate
  • Sand/Cement Screed
  • Concrete
  • Plywood Overlay
  • Electric Underfloor Heating
  • Water/Wet System
  • Underfloor Heating
  • Tile Backer Boards
  • Tile on Tile
  • Flooring Grade Asphalt & Bitumen
  • Anhydrite Screeds
  • Fibre Cement Sheet
  • T & G Floorboards
  • Floating Floors
  • Existing Vinyl Tiles
  • Steel/Metal Surfaces
  • Fibreglass

Bag calculator

To calculate the number of bags required, please complete the following: