Preparation

Primers are designed to stabilise and seal the substrate prior to applying one of the Tilemaster cement based products.  Primers increase the adhesion of cement based products.

Flexible additives are used to enhance the performance of Tilemaster cement based products.  When added to tile adhesive and/or grout, the flexible additive improves the products adhesion, flexibility and durability.

FAST One Coat DPM

Fast Curing, One Coat, Epoxy, Surface Damp Proof Membrane

Tilemaster FAST One Coat DPM is a two component, solvent free, one coat epoxy Damp Proof Membrane. Tilemaster FAST One Coat DPM is suitable for use in a one coat application on a wide range of substrates including concrete, sand & cement screeds and calcium sulphate screeds.

Tilemaster FAST One Coat DPM is ideal for use as a damp proof membrane where the residual moisture content in a new or existing cementitious screed is up to 98% Relative Humidity (RH). Tilemaster FAST One Coat DPM can also be used in a one coat application to deal with damp substrates where a structural damp proof membrane is not present or where the structural damp proof membrane is ineffective. Once cured, Tilemaster FAST One Coat DPM produces a membrane which can accommodate hygrometer readings up to 98% RH on cement based screeds, up to 90% RH on heated calcium sulphate screeds and up to 95% RH on unheated calcium sulphate screeds, without resulting in bond strength issues. Tilemaster FAST One Coat DPM has effective resistance to water, grease, oil, dilute mineral and organic acids.

FAST One Coat DPM

Coverage
When applied to a smooth surface using an A2 trowel: A 3kg unit will cover up to approximately 7.5m2 A 7kg unit will cover up to approximately 17.5m2 A 14kg unit will cover up to approximately 35m2

Pack Sizes
3kg, 7kg, 14kg

Colour
Dark Metallic

Advantages
  • True One Coat System
  • Fast Curing – Ready To Receive Smoothing Compounds In 4 – 5 Hours
  • Suitable For Use On Surfaces With A Moisture Reading Of Up To 98% RH
  • Can Be Installed Where No Structural DPM Is Present As A One Coat Application.
  • Suitable For Use Over Underfloor Heating systems
  • Use On Heated Calcium Sulphate Screeds With A Moisture Reading Of Up To 90% RH
  • Use On Unheated Calcium Sulphate Screeds With A Moisture Reading Of Up To 95% RH
  • Supplied In Convenient Easy To Use Packaging

Other adhesives in our range

Bag calculator

To calculate the number of bags required, please complete the following: