The Technology Behind LevelFlex+ FINISH
We developed Tilemaster LevelFlex+ FINISH with the aim of making an installer's life easier, not only in the application of the smoothing compound, but also as the ultra smooth surface allows direct installation without any additional preparation.
Rapid setting and ready to walk on after 2.5 hours and lay flooring after 4 hours, it can be used at depths from 2mm - 60mm in one application on a variety of substrates including over flooring grade bitumen/asphalt.
It is moisture tolerant and can be used under an epoxy DPM, and flexible and fibre reinforced making it suitable for use with UFH.
The finished product uses several innovative technologies to improve its performance which are explained below.
Aggregate Suspension Technology
LevelFlex+ FINISH is formulated to ensure that all components are suspended within the mixed product, causing no separation, no weak surfaces and no inconsistent product.
Advanced Cement Binder Technology
This technology allows the setting times of the product to be tuned perfectly, ensuring that a consistent result is achieved time after time, to enable resilient floor coverings to be installed after 4 hours.
Preventative Air Entraining Technology
This works to remove the amount of entrained air within the product, forcing the air out during and after mixing, meaning that a better surface finish is achieved, and less time is spent spike rolling the product once applied.
Stable Expansion Formulation
LevelFlex+ FINISH has been formulated to provide stable expansion. This enables the product to remain stable when in contact with moisture, so is ideal for pre-smoothing a surface before the installation of an epoxy DPM such as Tilemaster FAST One Coat DPM.
Moisture Retention
LevelFlex+ FINISH retains the moisture within the mixed product whilst it is applied, enabling far longer working times and wet edges for the installer. LevelFlex+ FINISH will typically give an installer up to a 30 – 35 minute wet edge time.
You can download the product data sheet here, or view a video about the product features on our YouTube channel.