Floor Levelling

The preparation of the substrate is of paramount importance.  When applying your choice of finished flooring, it is made far easier when the substrate is smooth, flat and level.  We manufacture three high performing self levelling compounds that are suitable for application to a wide array of substrates and to depths of up to 50mm in one application.  Each levelling compound will provide you with a well prepared substrate ready to receive the finished flooring. 

Pro Flow

High Performance Two Part Smoothing Compound

Pro Flow is a rapid setting, high performance latex based two part smoothing compound, consisting of a specially formulated powder component that is mixed with a pre-gauged, protein free and high polymer content liquid. It has excellent flow and adhesion properties and these unique properties ensure that Pro Flow can be used with confidence without the need to prime the large majority of substrates. Pro Flow is suitable for use over a wide range of substrates including those subject to limited movement and/or vibration such as plywood overlay and underfloor heating systems as well as for solid substrates such as concrete and sand/cement screed. The product is also moisture tolerant which means it can be used to level floors where no damp proof membrane is present. Once mixed, Pro Flow will remain workable for 20 - 25 minutes and it will accept light foot traffic after 90 minutes in ideal conditions. Tiles can be applied after 3 hours and decorative floor coverings can be installed after 4 hours. Pro Flow can be applied from depths of 2 - 12mm in one application. 

Pro Flow

Coverage
20kg will cover 5m² at a depth of 3mm

Pack Sizes
20kg

Colour
Grey

Advantages
  • Apply from 2 - 12mm in one pour
  • Walk on after 90 minutes
  • Install tiles after 3 hours & decorative floor coverings after 4 hours
  • Suitable for use over old adhesive residues including bitumen
  • Moisture tolerant - can be used below a DPM
  • Excellent adhesion properties without priming most substrates
  • Ideal for use above underfloor heating systems
  • Ideal for plywood overlay substrates
  • Low odour
  • Protein free

Other adhesives in our range

Bag calculator

To calculate the number of bags required, please complete the following: