Floor Levelling

The preparation of the substrate is of paramount importance.  When applying your choice of finished flooring, it is made far easier when the substrate is smooth, flat and level.  We manufacture three high performing self levelling compounds that are suitable for application to a wide array of substrates and to depths of up to 50mm in one application.  Each levelling compound will provide you with a well prepared substrate ready to receive the finished flooring. 

Super Flow 30

Ultra-Rapid Setting, High Performance Two Part Smoothing Compound

Tilemaster Super Flow 30 is an ultra-rapid setting and drying, high performance latex based two-part self-levelling floor compound that employs advanced binder system technology, providing an underlayment where a fast-track solution is required. The specially formulated powder component is mixed with the pre-gauged, protein free polymer latex liquid, giving a free-flowing, shrinkage compensated self-levelling floor compound.

Tilemaster Super Flow 30 has excellent flow and adhesion properties making it suitable for a wide range of both commercial and domestic applications. These unique properties ensure that Tilemaster Super Flow 30 can be used with confidence without the need to prime the large majority of substrates. Tilemaster Super Flow 30 is suitable for use over a wide range of substrates including sand/cement screeds, concrete, flooring grade asphalt/bitumen, ceramic, porcelain and terrazzo tiles, rigid steel, moisture tolerant old adhesive residues, epoxy damp proof membranes and plywood.

Once mixed, Tilemaster Super Flow 30 will remain workable for 10 – 15 minutes and it will accept light foot traffic after 30 minutes in ideal conditions. Decorative floor coverings can be installed after 90 minutes and ceramic tiles can be applied after 45 – 60 minutes. Tilemaster Super Flow 30 can be applied from depths of 2mm – 15mm in one application.

 

 

Super Flow 30

Pack Sizes
20kg, 4.5litre

Colour
Beige, White

Advantages
  • Install decorative floor coverings after 90 minutes and ceramic tiles after 45-60 minutes
  • Apply directly to a DPM within 24 hours without priming
  • Suitable for use over old adhesive residues including bitumen
  • Moisture tolerant - can be used below a DPM
  • Excellent flow and self-levelling properties
  • Excellent adhesion properties without priming most substrates
  • Ideal for use above underfloor heating systems
  • Ideal for timber substrates
  • Low odour
  • Protein free

Other adhesives in our range

Bag calculator

To calculate the number of bags required, please complete the following: