New Tilemaster FAST One Coat DPM joins ‘game changing’ range
Tilemaster Adhesives has introduced a new damp proof membrane to its surface preparation range. New FAST One Coat DPM is a solvent-free, epoxy-based product that cures in just 4-5 hours. The two-component system can be used on surfaces with a relative humidity of up to 98% and can be installed where no structural DPM is present.
New FAST One Coat DPM is suitable for a wide range of substrates, including concrete, sand/cement, anhydrite/calcium sulphate screeds and over underfloor heating systems. During mixing, the tin’s bottom section is unclasped and poured into the larger top section for ease of use. One coat is then poured and applied with a trowel or roller. Once dry, the smooth, glossy surface provides effective resistance to water, grease, oil, dilute mineral and organic acids. Smoothing compounds can be applied after 4-5 hours drying time. If a structural DPM is ineffective or not present, an additional coat is applied.
Rough or uneven substrates can be pre-smoothed with new Tilemaster Super Flow 30. The ultra-rapid setting, two-part self-leveller provides a top surface finish that can be walked on within 30 minutes. FAST One Coat DPM can be applied 90 minutes after applying Super Flow 30, therefore complementing the speed and ease benefits of FAST One Coat DPM for a game changing installation.
For further media information, please contact:
Angela Fitzhugh PR Ltd on email firstname.lastname@example.org or tel. 01590 622521
Editor’s note: Established in 1990, Tilemaster Adhesives is a UK-based family business renowned for its family virtues of care for its customers. It offers a comprehensive range of products, manufactured to the highest standards at its plant in Leyland, Lancashire. Tilemaster’s one-to-one customer service spans from product formulation and packaging, to technical site support.