High coverage, tolerant solution with Tilemaster One Coat DPM
Tilemaster’s One Coat DPM provides a high coverage, solvent-free solution for a range of substrates – from sand and cement, to ‘wet’ underfloor heating systems. The two-component epoxy is suitable for new and existing screeds, with up to 97% relative humidity. It offers high-bond strength and is also resistant to grease, oil, dilute mineral and organic acids.
One Coat DPM is a two-component epoxy with a natural, pigment-free composition for increased coverage. In addition to standard conditions, it can also be used to deal with damp substrates, where a structural DPM isn’t present or is ineffective. Where there is no structural membrane, the product should be applied as a two-coat system. Once cured, the epoxy produces a membrane that can accommodate up to 97% RH on cement based screeds and 87% RH on anhydrite/calcium sulphate screeds, without resulting in bond strength issues.
The versatile epoxy has a straw/amber tone and is available in easy to use 3kg and 10kg drums. At 20°c, it provides a working time of approximately 45 minutes and a cure time of between 16-24 hours.
Tilemaster’s One Coat DPM is offered as part of a comprehensive range of surface preparation products, as well as adhesives, grouts, silicones, floor-levelling solutions and ancillary items. All products are designed to help solve challenges faced by flooring contractors and tilers and are manufactured to the highest standards at Tilemaster’s plant in Leyland, Lancashire.
For further media information, please contact:
Angela Fitzhugh PR Ltd on email firstname.lastname@example.org or tel. 01590 622521
Editor’s note: Established in 1990, Tilemaster Adhesives is a UK-based family business renowned for its family virtues of care for its customers. It offers a comprehensive range of products, manufactured to the highest standards at its plant in Leyland, Lancashire. Tilemaster’s one-to-one customer service spans from product formulation and packaging, to technical site support.